See the Light

Besides a rechargeable battery and a durable aluminum alloy construction, there is a lot else that makes this diving light very special. A lot of precautions have been taken to make a lamp that never fails and is easy to use. The light is sealed with 3 O-rings and has 1 on/off button, which is also used to change the intensity of the light cone. No more getting water in the lamp because it is not closed properly.

Specifications

• Model: Razor Backup Light BL1200
• LED: CREE XPL LED (Max 1200 lumens) Color temperature: Cold white light 6500k
• Lifetime: High strength - 1.5 hours, Low strength - 8 hours. Has 3 settings - High, Medium, Low
• Reflector: Glossy aluminum reflector
• Lens: 4mm tempered glass
• Construction material: Aircraft-grade aluminum
• Surface treatment: Premium Type III hard-anodizing
• Colour: Black
• Battery: 1x 18650 rechargeable Li-ion battery with overcharge protection
• Waterproof to: 100m
• Dimensions: 148mm (L) x 26mm (Dia. end) x 29mm (Dia. head)
• Weight: 120g without battery
• Impact resistance: 1.5 meters

Read more about Razor Backup Light features below:

THE RAZOR 18650 RECHARGEABLE LI-ION BATTERY

CHARGING WAS NEVER EASIER

You can charge the Razor 18650 Li-ion battery straight with the USB cable that comes along with the light. No need for an extra charger or adapters in foreign countries. You can charge the light from your Laptop, your car or wherever you are. The only thing you need is an USB-plug to charge it.
Once you connected the USB-cable you will see that status of the charging:
RED: the battery is charging < br>BLUE: the battery is fully charged

THE RAZOR 18650 RECHARGEABLE LI-ION BATTERY

NO EXTRA MONEY FOR BATTERIES ANYMORE

The Razor LC 18650, 3000 mAh, 3.7 Volt Lithium Ion battery has no "memory effect", low recurring operation cost, short circuit and over-current protection, a shelf-life of around 10 years and is environmentally friendly.

THE RAZOR BACKUP LIGHT BL1200

TRIPLE O RING

With 3 O Rings on the closing it's almost impossible that Water can enter the light. In addition the light head doesn't have to be turned in the water for ON/OFF thanks to the button on the back of the Light.

THE RAZOR BACKUP LIGHT BL1200

DIMENSIONS

With its dimensions of 148 mm x 29 mm the Razor BL1200 is a super handy light which works great on the helmet and as well on the Hand Mount.

THE RAZOR BACKUP LIGHT BL1200

BUTTON ON THE BACK OF THE LIGHT

The Razor BL1200 comes with an ON/OFF Button on the back of the light. That makes it easy to turn the light on and off even with thick dry gloves.

THE RAZOR BACKUP LIGHT BL1200

PERFECT WITH OPTIONAL BRACKET

With the optional available bracket you can mount the light straight to the helmet with 2 screws. You are still able to take the light off the helmet in case you need it without blinding your buddies while using it.

THE RAZOR BACKUP LIGHT BL1200

COMBINE IT WITH THE RAZOR HAND MOUNT

Additionally you can use the light with the additional bracket along with either the helmet mount or the hand mount. Using it this way gives you the complete flexibility if you mount the light on the helmet your hand or just stored in the Expandable pouch.
The use of a backup light was never more flexible than with the Razor Light Mount System.

THE RAZOR BACKUP LIGHT BL1200

PACKAGE CONTENT